Search "Franklin TN water" and you would expect one answer. There are actually four utilities that send water to Franklin addresses: City of Franklin Water Management, Milcrofton Utility District, HB&TS Utility District and Mallory Valley Utility District.
Which one you are on decides which annual report describes your tap. Here is how to tell which is yours, and what the latest reports say.
Already know what bothers you about your water? Tell us, and we will tell you which system fits your home and what it costs.
How to tell which utility serves your house
Look at your water bill. The utility's name is printed on it, and that is the simplest way to know. A Franklin mailing address does not tell you, because all four utilities serve homes with one.
- HB&TS stands for Hillsboro, Burwood and Thompson's Station. The district lists Leipers Fork, Burwood, Thompson's Station, Franklin, Bethesda, Flat Creek, Greenbrier and Kingfield in its service area.
- Milcrofton Utility District is based on Arno Road and describes itself as serving the greater Franklin area, across a 94.2-square-mile service area.
- Mallory Valley Utility District serves parts of Franklin and the Brentwood side of the county.
- City of Franklin Water Management is the city's own water department.
Where Franklin's water comes from
The three districts all trace back to the same plant. Harpeth Valley Utilities District treats water from the Cumberland River at Cheatham Lake, and both Milcrofton and HB&TS say in their reports that their water comes from Harpeth Valley. Milcrofton also buys part of its water from Mallory Valley, which in turn buys from Harpeth Valley.
Milcrofton says that water travels about 20 miles underground to reach the center of its service area.
The City of Franklin runs its own water department and publishes its own annual report on the city's website.
What the latest reports say
One part per million (ppm) is the same as one milligram per liter. One part per billion (ppb) is a thousand times smaller.
Milcrofton Utility District (2025 report)
- Hardness: 98 ppm on average, ranging from 80 to 128. Milcrofton converts that to 5.73 grains per gallon, the unit softeners are sized in.
- Disinfectant: chlorine, 1.49 ppm on average (0.24 to 2.14), against a limit of 4.
- Total trihalomethanes: 52.0 ppb (30 to 61), against a limit of 80.
- Total haloacetic acids: 32.2 ppb (17 to 43), against a limit of 60.
- Fluoride: 0.53 ppm on average.
- Lead: not detected at the 90th percentile in its 2023 sampling, and the district says it found no lead service lines in its system.
Trihalomethanes and haloacetic acids are disinfection byproducts. They form when chlorine reacts with natural material in the water. For comparison, Harpeth Valley's own report lists trihalomethanes at 40.1 ppb.
HB&TS Utility District (2026 report)
- Hardness: 98 ppm on average in 2025, or 5.73 grains per gallon. The district calls its water slightly or moderately hard.
- Disinfectant: chlorine, 1.4 ppm on average (0.7 to 2), from 2024 sampling.
- Total trihalomethanes: 56 ppb on average (38 to 63), and haloacetic acids 37 ppb (20 to 51), both from 2024 sampling.
- Lead: 1.0 ppb at the 90th percentile in its 2023 sampling.
HB&TS also posted a lead and copper notice in 2026. It says some samples taken from customers' home plumbing came back with lead above the action level. The district says it has no lead service lines, so the lead came from plumbing inside those homes, and that a second round of sampling at those homes found no lead.
Mallory Valley Utility District and the City of Franklin
Both publish their own yearly reports. We are not quoting numbers for either here, and we will not guess them from the other districts. If your bill is from one of these two, read that utility's own report.
What 98 ppm means in your house
The U.S. Geological Survey rates 61 to 120 mg/L as moderately hard, and 121 to 180 as hard. So the districts' average sits in "moderately hard," and the top of Milcrofton's range, 128, crosses into "hard."
Day to day, that hardness is the calcium and magnesium that leave spots on glassware, a film on the shower door and a crust inside the water heater. The chlorine is a separate thing, and it is what some people taste and smell at the tap.
Not sure which of these is your problem? Tell us which utility is on your bill and what you notice at the tap, and we will match it to a system.
Which system fits a Franklin home
Andy and his crew do the installs, and installation is included in the price rather than billed on top.
- Scale on fixtures and glass. Our Standard Whole-Home Softener + Filtration removes the calcium and magnesium on the main line, so every faucet and appliance gets softened water.
- Chlorine taste, scale and drinking water all at once. Our whole-home systems soften and carbon-filter every tap in one tank, and pair with an under-sink reverse osmosis system for drinking water.
- Better water to drink and cook with. Our 5-Stage Tank Reverse Osmosis runs five stages under the kitchen sink to its own faucet, and our tankless RO does it without the storage tank. Its membrane is fine enough to catch dissolved solids, lead and arsenic that carbon alone cannot.
Our Franklin water softener page and Franklin service area page cover the town in more detail. If you are south of town in Spring Hill, that is a different utility again.
Franklin TN water FAQ
Who supplies water in Franklin, TN?
Four utilities serve Franklin addresses: City of Franklin Water Management, Milcrofton Utility District, HB&TS Utility District and Mallory Valley Utility District. The name on your water bill tells you which one is yours.
Is Franklin TN water hard?
Milcrofton and HB&TS both report an average of 98 ppm for 2025, about 5.73 grains per gallon. The USGS rates that as moderately hard. The City of Franklin and Mallory Valley publish their own figures.
Does Franklin water have chlorine in it?
Milcrofton and HB&TS both list chlorine as their disinfectant. Carbon filtration takes the chlorine taste out, at every faucet or at the kitchen sink.
Find the right system for your Franklin home
Call us or fill out the form for system details and pricing. Installation is free, and tanks and valves carry a lifetime warranty.
